Connecting Everything

Start Up.    Home     Orders    Products      ↔ Orders Orders Shipping Shippings 

Inicio

Productos   Ordenes Envios
Call Us. Call us   Contact Us   Contact Us  ↔  Staff     ↔ Register NOW Resellers 

 Llamenos  

Contactenos  Staff Registrese
  Buscar:      Busqueda avanzada
Seleccione Idioma: 
 
     Categorias
Ofertas !!!
Automatizacion
Sistemas Seguridad
Camaras CCTV-IP
Networking & Voip
Electronicos

Revista Tecnologica
Catalogos
Resellers
............................
Servicio de Importacion


     Especial
Certificados de Regalos


     Ayuda
Recuperacion Contraseña
Contactenos
Terminos de privacidad
Terminos & Condiciones
Envios
Order
Resellers
Argentina
Catalogo de Productos
Guia de Aplicaciones Practicas
Controlbox
Staff
ticket
status

  CONTRLHOME :: Automatizacion :: Tecnologia Z-Wave :: Zwave Screw-In Lamp Module

  Zwave Screw-In Lamp Module #CH3311
Zwave Screw-In Lamp Module  Screw-in lamp module allows you to add Z-Wave RF remote control to any indoor or outdoor light fixture with minimal effort
Safe for use with incandescent or compact fluorescent bulbs
Weather-resistant module is safe for use in dry, damp or wet locations


Adding wireless remote control to any outdoor light can be as easy as screwing in a light bulb. The Z-Wave™ Screw-In Lamp Module screws into the fixture base between the fixture and the bulb for a completely unseen addition that adds RF remote control to the light: Turn it on and off using any Z-Wave-enabled controller. This weather-resistant module is safe for use in dry, damp or wet locations, so you won't have to think twice about adding remote control to your coach lights, lampposts or outdoor floodlights up to 300 watts.


Easy to Install & Set Up
Designed for standard light bulb fittings, the Z-Wave Screw-In Lamp Module can control incandescent lights up to 300 watts and compact fluorescent bulbs up to 42 watts. To set up the module, screw it into the fixture and the bulb into the module. Link it to your Z-Wave network following the instructions on your Z-Wave controller. You can also turn the light on and off manually. Note: The Z-Wave Screw-In Lamp Module is not recommended for enclosed fixtures with base-above-bulb mounting.

Need smaller bulbs for smaller lamps with less clearance? Try the Sylvania Elogic Bulbs that are 30% smaller but last 50% longer than standard bulbs.


Automatic Repeating Increases Z-Wave Network Reliability
Each module in a Z-Wave network is designed to act as a repeater, automatically re-transmitting the RF signal to ensure that the signal is received by its intended destination by routing the signal around obstacles and radio dead spots. Feedback will allow you to see whether your device has received the on/off signal without having to look outside.

Specifications

Intermatic Product No.: HA05C
UPC: 078275083912
Dimensions: 3 1/2" H x 3" diameter
Ratings: 300 watts, 2.5 amps Tungsten; 42 watts compact fluorescent
Power: 120V AC, 60Hz
RF Range: 50 feet
Operating Temperature Range: -31° F to 140° F (-35° C to 60° C)
Approvals: FCC, IC, CSA listed
Country of Manufacture: China
Warranty: 6 years, limited

Detalle
 
Part# HA05C
SKU CH3311
Precio: U$S 49.00 (€ 42.63)

Opciones
 
Cantidad

        

 

  Productos Recomendados
  • Appliance Module
  • 2,4 Ghz 1/4" DSP color CCD Mini-Camera+2.4GHz AV RX+Audio
  • Day and Night Color Dome Camera 1/4 CCD 380Lines 1Lux w/ 10LEDS
  • Panning Outdoor SONY CCD Color Dome 4mm Auto Iris, 350°
  • Trendware TV-IP400 Pan & Tilt Camera (CLON)
  •  

      Puntaje del cliente
    Puntaje del cliente

    Voto del cliente

     


    Comentario del cliente

    Autor: Desconocido


     
     

     
         Su carro
      
    Carro vacio
      

    Ver Carro
    Finalizar


         Autentificacion
    Nombre de usuario

    Contraseña

    Ingresar
    Registrarse


         Noticias
    Esta area contiene las ultimas noticias. Puede suscribirse a traves del formulario debajo.

    Suscribir al newsletter mensual
    !


    Suscribir 


     

         Copyright © 1998-2008 CONTRLHOME